Cartridge
Systems
Product
|
Unit
|
Code
|
Price (€)
|
Cartridge Holder "HYPERCHROME"
|
Piece
|
K001
|
128.00
|
which
consists of (see construction
of cartridge systems)
Cartridge Holder (8) with Gripp Protection (9) and Double End Fitting (11)
for cartridges of 5 mm, 10 mm and
20 mm length and lengthening hull for 20 mm cartridges (not shown).
For 5 mm
cartridges additionally a Distance Piece (12) of 5 mm length is needed (not
included in the price), which is installed in the Cartridge Holder together
with the Cartrigde (14). Furthermore in this case one Capillary End
Fitting with welded connection capillary(13) has to be used.
Accessories
for the cartridge L = 5 mm |
Unit |
Code |
Price (€) |
Distance Piece 5
mm |
Piece |
K0014 |
15.00 |
Capillary End Fitting ID 0.12 mm
(Length of capillary 250 mm) |
Piece |
K0012 |
38.00 |
Capillary End Fitting ID 0.12 mm
(Length of capillary 100 mm) |
Piece |
K0010 |
38.00 |
Capillary End Fitting ID 0.25 mm
(Length of capillary 250 mm) |
Piece |
K0013 |
30.50 |
Capillary End Fitting ID 0.25 mm
(Length of capillary 100 mm) |
Piece |
K0015 |
30.50 |
Product |
Unit |
Code |
Price (€) |
Cartridge Holder for any system
(KFS)
with connecting thread for 10 mm cartridges |
Piece |
K0100 |
125.00 |
Cartridge Holder for any system
(KFS)
with connecting thread for 20 mm cartridges |
Piece |
K0200 |
135.00 |
Cartridge Holder for any system
(KFS)
for cartridges of 5, 10, and 20 mm length |
Piece |
K002 |
95.00 |
Accessories
for KFS |
Unit |
Code |
Price (€) |
Distance Piece 15
mm |
Piece |
K0011 |
17.00 |
Distance Piece 10
mm |
Piece |
K0021 |
18.00 |
Capillary End Fitting ID 0.12 mm
(Length of capillary 250 mm) |
Piece
* |
K0012 |
38.00 |
Capillary End Fitting ID 0.12 mm
(Length of capillary 100 mm) |
Piece
* |
K0010 |
38.00 |
Capillary End Fitting ID 0.25 mm
(Length of capillary 250 mm) |
Piece
* |
K0013 |
30.50 |
Capillary End Fitting ID 0.25 mm
(Length of capillary 100 mm) |
Piece
* |
K0015 |
30.50 |
* For the Cartridge
Holder KFS K002 always two pieces are needed.
Assembly of KFS
K002 The cartridge
is sealed both on the left and right side by a Capillary End Fitting of the
desired capillary diameter and inserted together with or
without a Distance Piece. (No Distance Piece is required in the case of a cartridge with L = 20 mm.)
See also Cartridge
Holder for 1 mm-Microbore Columns |